Izdelki za oprema za obloge (504)

USE : Track Levelling Works, (renovation, etc.) in service tracks and factories. ADVANTAGES : Simple and Tough Equipment. - 2 Stand with rail couplings - Standard Height = 1.30 m - Net Weight of a complete Set of Grade Stakes = 14 Kg - Reference : 25 OPTIONS : Plastic (PVC) Grade Stakes - Weight = 7 Kg - Ref. 25-P

EL LOAD is an automated packing station for bulk products or packs. The products (cups, bottles and packs) can be: - Grouped, referenced and picked up when stationary - Synchronized / timed and picked-up in continuous movement (following the conveyor) Open boxes or boxes with flaps can be: - Loaded when stopped after referencing - Loaded in continuous movement (following the conveyor) EL LOAD is totally designed to be interfaced with any SYNERLINK machines.

The forming line consists of machines for orienting and forming a multi-layer strand mat for OSB production. The forming line consists of two mat formers including disc orienter heads to create the surface layer and one or two mat formers including pocket orienter heads to create the core layer. The threelayer strand mat thus produced enables high orienting degrees and is a prerequisite for meeting the relevant OSB-standard requirements. Additional devices for quality monitoring complete the function of Siempelkamp’s forming line. The plant modules can be adjusted to the respective requirements thus preparing the mat optimally for its compaction in a ContiRoll®. The equipment is designed to produce board thicknesses between 6 and 38 mm without any problem. The forming belt conveyor is a modular design as well tuned to plant output and feasible board formats.

- Standard shuttles 48x48 mm - RFID technology - SMS management by routing software OMS - Mainly used by watchmaking sector and microtechnology - Intelligent conveyor for industrial automation with production traceability Examples: - Assembly line for balance-springs - Assembly line for barrels and the control - Flexible transfer line

Full Servo Driven for highest flexibility, highest repeatability and operator friendly conversion. Valveless Rotary Piston pump for Hygiene Filling. Contact parts are FDA Approved material and autoclavable. Laminar Air Flow Booth. Auto rejection without machine stop. Optional 100% IPC Tare-in, Tare-out weight check. Optional N2 flushing. Optional FDA 21 CFR Part 11. Optional Realtime Equipment OEE monitoring anytime, anywhere.

Freek pump and gas line heaters for trace heating are designed to regulate temperatures in order to prevent freezing or condensation in the line. As with all our heaters, these can be designed and produced to your bespoke specifications. A most frequent application for gas & pump line heaters the semi-conductor process in which gases such as Tetraethyl Orthosilicate (TEOS), Boron Trichloride (BCl3), Aluminium Chloride (AlCl3), Chlorine Triuoride (ClF3) and Dichlorosilane (DCS) condense at low temperatures. Should this occur, it could result in wafer defect. Gas and pump line heaters consistently heat the lines and provide a simple heating solution and prevent condensation build up. The optimum line temperature will vary depending on the process.

The ability to gently handle components of different dimensions, geometries and surface structures opens up completely new possibilities. The small gripping head offers flexible and simple cooperation between man and machine. Benefit from ✅ Increased efficiency of your processes ✅ Increased availability of your personnel ✅ Increase in the production speed ✅ Simple plug & play commissioning thanks to decentralized blower technology ✅ Modular design to increase performance Minimize ❌ Set-up times ❌ Maintenance costs ❌ Personnel deployment ❌ Process complexity Possible applications of the FH-R40 ✅ Industrial robot applications for components up to 1 kg ✅ Loading and unloading of machines (e.g. press shop and body shop) ✅ Bin picking applications ✅ Transportation of fragile parts ✅ Use in systems with high component variability ✅ Use with collaborative robots Weight:0,27 kg Load capavity:10 N Gripping surface Ø:40 mm

Wir sind stolz darauf, unsere hochmoderne multifunktionale Produktionsanlage zu präsentieren, eine bahnbrechende Innovation, die den Prozess der Herstellung verschiedener Lösungen rationalisieren und vereinfachen soll, darunter Flüssigdünger wie NPK, UAN und mehr sowie AUS-Lösungen wie AdBlue. Diese vollautomatische und intelligente Produktionsanlage soll die Flüssigdüngerindustrie revolutionieren. Profitable Produktion:Nur 15 kW elektrischer Energieverbrauch Schnelle Produktion:20 Minuten für jede Charge Intelligente Produktion:Automatische Kontrolle aller Elemente und Teile Minimale Personalstärke:1 Techniker reicht für die vollständige Produktion Zollfrei:A-TR wird ausgestellt Benutzerfreundliches UX/UI-Design:einfach zu verwenden

Cut-to-length lines for T-shaped panels Slitting and recoiling lines with automatic separators positioning Dedicated plants for pre-painted,? film-coated or other special materials (stucco-design, mesh, ground surfaces…) Special lines for panels production, with punching, shearing, roll-forming and bending Continuous punching lines Spool recoiling lines De-burring lines Combined lines with partial cut, where a part of the strip is recoiled for future use Machines for mass production or very flexible plants for small productions Cut-to-length and recoiling lines, with coils packaging stations. Customized and very enhanced productions, which integrate the sheet-metal processing with rotating turret punching (possibility of up to 24 different tools? a time, even in “multitools” solutions) or fiber laser cut.

DAMS Double Slicer and Feeder Flowpack Group Packing Line DGKP-100

The CLMIA.LiNE D KNR ensures ideal ripening conditions for your products. Besides the adjustment of the room's temperature and moisture exactly to the required level, the system has many more advantages For example its intelligent fancontrol, preventing the unintended growth of spores! Constant conditions for reproducible quality Highquality design of aggregate and piping Lowmaintenance system Intelligent fancontrol to prevent unintended sporegrowth

Precision alignment and process technology for the assembly of small products down to micrometer accuracy. CTO technology for assembling small products in a clean room environment - where precision is the key. Modular workstations can be used as standalone operating platforms, integrated into semi-automated platforms, or scaled up for fully automated production lines producing up to 10m products/year.

The Aluminum Ladders Professional Line LProfi - Simple Ladder is a classic model that combines robustness with ease of transport. This ladder is designed to provide great stability and safety for professional use, with a maximum capacity of 150kgs. It is available in lengths from 3 to 6 meters and is constructed with high-quality aluminum. The ladder features non-slip steps and a stabilizer base with rubber feet, ensuring safety during use. Its design complies with the European Standard EN131, making it a reliable choice for various professional applications.

Die Abfüllmaschine ist ein gravimetrisch-volumetrisches Gerät, was bedeutet, dass er jedes Glas bis zur festgelegten Höhe it dem Aufguss füllt und ein Dilatationsspalt übrig lässt, d.h. ein Freiraum zwischen dem Aufguss (Marinade oder Salzlake) im Glas und dem Glasrand, ungeachtet der Glasgröße und Einmachmenge. Dieses technologische Erfordernis zeichnet unser Gerät als eine besondere Abfüllanlage aus, die beim Übergießen von zum Beispiel Fleischklößen, Kohlrouladen, Kutteln, Fisch, Gurken, Obst mit dem Aufguss, Sauce, Marinade bzw. Öl immer bis zur gleichen Höhe (ungeachtet der Einsatzgröße) füllt. Für die Abfüllmaschine gibt drei Arten von Gefäßen: 1. Gefäß für das Abfüllen von Flüssigkeiten wie Salzlake oder Einmachessig 2. Gefäß für Saucen 3. Gefäß für das Abfüllen von Öl Technische Daten: Höhe: 1900 mm Breite: 760 mm Länge innerhalb des Förderers: 700 mm Leistung: bis 4200 Verpackungen pro Stunde Energieverbrauch: 0,18 kW Einsetzbare Gläser:von 0,2 bis 0,9 I

CNC machining steel angel.

These are the parts used in ventilation system.Used for urban building ventilation, household product ventilation and other products.

Der Jacob Kabelverbinder JCC ist bestens geeignet zum schnellen und sicheren Verbinden von zwei Kabeln oder Leitungen. • flexibel einzusetzen und mehrfach verwendbar • robustes Design für den Einsatz in rauhen Umgebungsbedingungen • Anschlusstechnik CAGE CLAMP®, WAGO Durchgangsverbinder mit Hebel, zugelassen nach EN 60998-2-2 und UL 486C • Bemessungsspannung 450 V • Bemessungsstrom 32 A • Leiterwerkstoff Kupfer • Leiter eindrähtiger und feindrähtiger Leiter 0,2 - 4 mm², • Art und Querschnitt mehrdrähtiger Leiter 0,2 - 2,5 mm² • Temperaturbereich -25 °C / +85 °C • Schutzart IP68 Material:Polyamid / Polycarbonat Schutzart:IP68

Effiziente Untertisch- und Deckenheizung für Kirchen, Warteräume und Sportanlage - Die HKLine Infrarotheizung ist eine platzsparende und unauffällige Heizlösung, die unter Tischen, Bänken oder an Decken montiert werden kann. Sie eignet sich ideal für Kirchen, Warteräume, Sportanlagen und andere Räume mit einer Deckenhöhe von bis zu 3 Metern. Mit ihrer schlanken Bauweise von nur 3,5 cm gibt die HKLine eine sanfte, gleichmäßige Strahlungswärme ab, die sowohl den Sitzbereich als auch den Fußboden erwärmt. Vorteile: Vielseitig: Infrarotheizung zur Unterbankmontage für Kirchen und Warteräume, sowie Deckenmontage in kleineren Räumen Schutzklasse IP44: Für den Einsatz in trockenen, feuchten und nassen Umgebungen Elegantes, unauffälliges Design: Die weiße, schmale Armatur fügt sich dezent in jede Umgebung ein Effizient: Schnelle, angenehme Strahlungswärme bei niedriger Oberflächentemperatur für hohen Komfort Platzsparend: Bei Deckenmontage bleiben Wand- und Bodenflächen frei und die Heizung ist vor Beschädigungen geschützt

Loss in weight gravimetric feeder for extrusion lines automatic control, it controlls the haull-off speed and weight per meter of pipes during extrusion process.

The line laser is a measuring device for aligning drive pulleys laterally, horizontally and vertically using a laser beam, preventing heavy wear to the edges of the belt. Laser beam range approx. 5 to 10 m Laser class 2 (EN 6082511997) Wavelength 630–680 mm Power < 1 mW Power supply 2 x 1.5 V (LR44) Note Never look directly into the laser beam and do not point it at other people, animals or strongly reflective surfaces. The device and the target points contain highpowered magnets. Individuals with pacemakers should not use the device due to safety reasons. Keep a safe distance away from electronic devices and wristwatches in order to prevent interference. The device must not be used in potentially explosive areas. Reference:22101

VASIL SWAY 1000 - maximum training effect while working out with the free weights. New form and content are the distinguishing features of the line VASIL SWAY 1000. New design is innovative and attractive. It will decorate your fitness center and will modernize it. VASIL SWAY 1000 has the independent loading levers. Due to the new production technology it approaches the trajectory of the sports-training machines to the maximum pattern of the limbs. It is ideal for the posttraumatic rehabilitation. VASIL SWAY 1000 - it is maximum loads in the minimum room. There is the possibility to work out safely with the record loadings to 350 kg. Maximum growth of the loading at the moment of peak traction.

Wir liefern Buchsen für Strangguss-Produktionslinien aus reinem Kupfer

Platinum HUB is a scalable platform you can customize according to your brazing process. You can set up the layout adding multiple stations to: flux, apply brazing paste or pre-formed brazing alloy, wash, dry and cool the parts you are processing, mark with galvo laser technology, and automatic loading and unloading the line using co-bot or industrial robots. This system will for sure adapt to your process and needs and will give you the chance to expand it and add new functions when you really need it. You can use all models of the Platinum series ranging from 2,5KW HF to 25KW MF. The intuitive control system perfectly fits with Seit Elettronica software philosophy: “We provide innovative industrial products with a simple and modern user interface.” These characteristics are pairing and expanding all the new functionalities of “Platinum App” to collect, compare, store and control all the key data from your production as cycle time, temperature and more.

Master Toppy is our top performing pile turner for turning, vibrating and aligning stacks up to 3000Kg. Ideal when used in-line with die-cutting and laminating machines.

1,Specification •,CIP Unit •,Storage tanks •,IP56 Control panel •,Piston Homogenizer •,Double jacket mixer Preparation unit •,Pasteurizer machine •,Butter molds melting tank •,Pasteurization Holding tubes •,Swing bend panel •,Lobe pumps PL150 •,End product storage tank with double jacket “ heat and cooling system •,Available certification up on your request UL, CE, GMP, FDA, ASME. •,Available documents up on your request I.Q (Installation qualification), O.Q Operational qualification), P.Q Performance qualification. 2,Description ,High stability on high capacity. ,Can handle multiple viscosity and types ,Type of metal used S.S 316 / 304 ,Certifications ISO 90012015, OHSAS 180012007, ISO 500012011, ISO 450012018 Yogurt and Ayran:Processing and packaging Food:Production line

KROKAN CUTTING LINE FULL INDUSTRIAL PC MOTION CONTROL WITH ELEVEN SERVO MOTORS WORK DETAILS CAPACITY; It varies according to the product type and weight and is approximately 500-600 kg/hour.

•Estaciones de trabajo automáticas y modulares para la elaboración de muffins, magdalenas y otros productos de pastelería. •Las líneas modulares constan de una serie de máquinas preparadas para cumplir de forma flexible sus requisitos. Mono-producción o multi-producción, de rango medio o industrial, depende de sus necesidades. •Estudiando su producto y la producción deseada podemos crear una estación de trabajo adecuada a sus necesidades. Las configuraciones son muy versátiles, permitiendo ampliar la línea de trabajo para aumentar la producción o diversificar el producto. •MÓDULOS: Cargador de Bandejas + Capsuladora + Dosificadora de Muffins/Dosificadora de Magdalenas/ Dosificadora de pastas + Dosificador de Topping + Inyectadora de producto ya horneado. •Las especificaciones técnicas varían en función de los módulos y la configuración final de la línea, consulte presupuesto personalizado para conocer los detalles de su línea deseada.

We produce hight quality indoor, outdoor products and offer complete solutions for play areas, Our guiding principles are a safe and secure play environment. We know the importance of both fun and safe in playgrounds. Safety, quality and design are our keywords. High quality provides high security and a safe play environment for children. Our durable products are of very good quality. This creates both high security and contributes to joyful play area.We are certified according to ISO 9001, 14001 and 18001. This means that the material used in production doesn’t harm the children playing nor the environment, whether it’s indoors or outdoors. We have many years of experience and have created many different designs for both indoor & outdoor playgrounds. Maybe one of our products is perfect for you? If so, contact us and let us know which playground you’re interested in.

Non-Stop production Line is a technology that revolutionises the production of toilet paper and kitchen towels by offering a continuous and uninterrupted production process. This line significantly improves the efficiency of the production process and product quality with its high speed and continuous operation capability. With its non-stop production capability it enables an impressive production capacity to be achieved, especially in large-scale production facilities. Non-Stop Toilet Paper Line is an industrial line that can operate continuously and produce rolls (toilet paper, kitchen towel) without interruption in production. It maximises the efficiency of the production line and enables more production with less workforce. Continuous operation feature means time and cost savings in production processes. Continuous and Non-Stop Production: Continuous production capability at high speed. MACHINE WIDTH MIN :1350 – MAX 2800 MM MACHINE SPEED :MAX 500 MT/MIN MAX ROLL REWINDING DIAMETER :MIN 90 – MAX 200 MM EMBOSSING GROUP :POINT TO POINT/ DECO/ DESL (OPTIONAL ) PERFORATION CONTROL :EMOTION REWINDING GROUP :AUTOMATIC TAIL CUT AND SEALING :AUTOMATIC PRODUCT PLY :1-4 EMBOSSING, LAMINATION, JOINTING ROLLER :HYDRAULIC ACCUMULATOR LOG SUPPLY :AUTOMATIC CORE SUPPLY :AUTOMATIC LOGSAW LOG SUPPLY :AUTOMATIC

Non-stop equalizing used right after ramose, decatizing or other textile finishing machines for perfectly rolling with no tension. All machines has 2 processing zones: one divergent (conical =1mt) where fabric is raised to the desired width; the other parallel=0.5mt, where fabric is stabilized and rolled. Optional can be added 2 vaporizing trays to eliminate creases.